Get a 15% discount on click boards™ by using the voucher code: CELEBRATE-300CLICK - valid until Monday, June 5, 09:00 CET
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping  To be determined
Total
Continue shopping Proceed to checkout

IR distance click

MIKROE-1991

32 g

IR distance click carries Sharp’s GP2Y0A60SZ0F distance measuring sensor, which comprises of an integrated PSD (position sensitive detector), an infrared LED and a signal processing circuit. The measuring range is between 10 and 150 cm. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target MCU over RST and AN pin on the mikroBUS™ line.

More details

 
 
 

$25.00

Quantity Unit Price
5 $23.75
20 $22.50

IR distance click carries Sharp’s GP2Y0A60SZ0F distance measuring sensor, which comprises of an integrated PSD (position sensitive detector), an infrared LED and a signal processing circuit. The measuring range is between 10 and 150 cm. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target MCU over RST and AN pin on the mikroBUS™ line.

Essential features

The sensor on IR distance click is not easily influenced by variations caused by the reflectivity of the object whose distance is measured (it won’t be able, however, to detect the distance of a mirror). For optimal operation the lens should be kept clean, because dust, water or oil on its surface can impact the precision of the sensor.

With these precautions in mind, the IR distance can be used for designing touch-less switches, various energy-saving devices, but it’s also suitable for robotics.

How it works

The click board outputs an analog voltage corresponding to the distance of the object (through the mikroBUS AN pin). An Enable (EN) pin is also utilized.

SMD jumpers

IR distance click features an SMD jumper (zero ohm resistor) that let’s you switch between a 3.3V or a 5V power supply.

Key features

  • 10 to 150 cm measurement range
  • GP2Y0A60SZ0F sensor
  • Interface: AN, RST
  • 3.3V or 5V power supply

Downloads

Product Type Proximity
Applications Touch-less switches, various energy-saving devices, robots
On-board modules Sharp’s GP2Y0A60SZ0F distance measuring sensor
Key Features 10 to 150 cm measurement range. Sensor consists of PSD, IR LED, and signal processing IC
Key Benefits Long range. Not easily influenced by reflectivity of object
Interface Analog
Power Supply 3.3V or 5V
Compatibility mikroBUS
Click board size M (42.9 x 25.4 mm)

Pinout diagram

This table shows how the pinout on IR distance click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

Notes Pin Mikrobus logo.png
mikroBUStm
Pin Notes
Voltage output VOUT 1 AN PWM 16 NC Not connected
Enable pin EN 2 RST INT 15 NC Not connected
Not connected NC 3 CS TX 14 NC Not connected
Not connected NC 4 SCK RX 13 NC Not connected
Not coneected NC 5 MISO SCL 12 NC Not connected
Not connected NC 6 MOSI SDA 11 NC Not connected
Power supply +3.3V 7 3.3V 5V 10 +5V Power supply
Ground GND 8 GND GND 9 GND Ground

Programming

Code examples for IR distance click, written for MikroElektronika hardware and compilers are available on Libstock.

This example initializes the ADC, UART and the IR distance board, and in an endless loop measures distance in centimetres and displays the result on the UART port.

01 void system_init()
02 {
03    ANSELA = 0x04;
04    TRISA = 0x04;
05    LATA = 0;
06    
07    ADC_Init();
08    UART1_Init( 57600 );
09    ir_measure_init( ADC_Read, 2, RESOLUTION_10 );
10    UART1_Write_Text( "Here and Readyrn" );
11 }
12 
13 void main()
14 {
15    char tmp_text[20];
16    
17    system_init();
18    
19    while( 1 )
20    {
21        sprintf( tmp_text, "Distance is: %4.2frn", ir_measure_cm() );
22        UART1_Write_Text( tmp_text );
23        Delay_ms( 500 );
24    }
25 }

You Might Also Need

Products in the same category

Send a message

IR distance click

IR distance click

What can we do for you?