Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping  To be determined
Total
Continue shopping Proceed to checkout

BIG8051

MIKROE-598

1000 g

New product

The BIG8051 development system supports 100-pin Silabs 8051 microcontrollers. It comes with the c8051f040 microcontroller. The system is delivered with a Silabs USB 2.0 programmer and many peripheral modules such as Serial Ethernet, DAC, ADC etc.

More details

$169.00

Table of contents

BIG8051

This board is a full-featured development environment for Silicon Labs C8051Fxxx microcontrollers. It has numerous on-board modules that help you to create your prototype device easily. It comes with C8051f040 microcontroller.

big8051-development-system.jpg

USB Debug Adapter

Programming. System comes with fast USB Debug Adapter - programmer from Silicon Laboratories.The USB Debug Adapter provides the interface between the PC’s USB port and the C8051Fxxx’s in-system debug/programming circuitry.

Features

Storage

Storage. MMC/SD Card slot allows you to store large ammounts of data externally on MMC/SD card using fast SPI communication. Store up to 8 Mbit of data in M25P80 Serial Flash Memory with 25 MHz SPI Bus Interface. It suports over 100,000 Erase/Program Cycles per Sector and has over 20 Year Data Retention. You can store 8x256 bytes of configuration data or other data into on-board 24AA01 Serial EEPROM with I2C interface. On-board Serial RAM memory based on 23K640 offers you the power to store your variables and temporary calculation results, and therefore free on-chip RAM for other purposes.

Displays

Displays and Touch screen. Graphic LCD 128x64 and LCD 2x16 can be easily connected via the on-board connectors. Board also features a Touch Screen controller.

Ports

PORTs, buttons and LEDs. 64 Buttons have stable operation and exceptional response curve. Ergonomy is at highest level so you will feel a great difference compared to other widely used standard switches. Monitor your program execution, or create all sorts of visual signalization using on-board 64 LEDs. SMD LEDs emmit high power red light.

Interfaces

Communication and Interfaces. RS-232 communication is enabled via two DB9 connectors and MAX232 level converters. USB connector, CAN transceiver MCP2551 and a serial Ethernet module are provided on-board as well.

Power

Powering the board using USB-UART connector. USB-UART connector can be used to provide the power to the board. You should be able to run all on-board modules, including GLCD display and Ethernet. You should know that you can draw maximum of 500mA from the PC USB port.

Input

DAC, ADC, Comparators. Convert digital signals to analog voltage levels using 12-bit MCP4921 DAC chip with SPI interface. It has two separate DAC channels and is connected to output Screw Terminal. You can attach four analog inputs using hi-quality ADC Input Screw Terminal Connectors. They are connected to CH0 – CH3 analog channels of the microcontroller. You can use on-chip comparator module with all it’s features and advantages, and test your program using comparator potentiometers connected to CP0+ and CP0- pins.

Package Contains

  • Damage resistant protective box
  • BIG8051 development system in antistatic bag
  • USB Debug Adapter with USB cable
  • User Manual and Board Schematic
Applications Developing and testing firmware, creating prototypes, learning embedded programming
Displays Connectors for GLCD 128x64 and LCD 2x16
Graphic controller Embedded inside MCU
Touch Screen Resistive
Architecture 8051 (8-bit)
MCU Comes with C8051F040 (on MCU card)
On-board modules Socket for DS1820 temperature sensor, 64 LEDs and 64 buttons, ADC input, DAC output, RF module soldering pads,
Programming USB Debug Adapter - programmer from Silicon Labs (delivered in the package). IDC10 JTAG/C2 male connector should be used for programming the microcontroller using external programmer/debugger
Interface USB-UART, Serial Ethernet, RS-232 A, RS-232 B, CAN
Storage Serial RAM (64 KB), Serial Flash (8 Mbit), Serial EEPROM, MMC/SD card slot
Sound and Audio Piezo buzzer
Expandability 1 x IDC10 header for each PORT
Integration Mounting holes
Power Supply 5V (via USB) or 9-32V AC, 7-23V DC (via adapter)
Total rating:
0/5
Based on 0 reviews Write a Review

You Might Also Need

Products in the same category

Send a message

BIG8051

BIG8051

What can we do for you?