15% OFF on everything in the shop - the offer lasts until June 27, 12:00 CET. Discount applies at checkout
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping  To be determined
Total
Continue shopping Proceed to checkout
EasyMx PRO v7 for STM32 MCUcard with STM32F207VGT6 View larger
EasyMx PRO v7 for STM32 MCUcard with STM32F207VGT6

EasyMx PRO v7 for STM32 MCUcard with STM32F207VGT6

MIKROE-1104

20 g

The HP ETH MCU card is shown on Figure 1. It contains STM32F207VGT6 microcontroller with on-chip peripherals and is a great choice for both beginners and professionals. After testing and building the final program, this card can also be taken out of the board socket and used in your final device.

More details

$24.00

Quantity Unit Price
5 $22.80
20 $21.60

STM32F207VGT6 has 120MHz frequency, 1 Mbyte of Flash memory, 128K + 4K bytes of general-purpose SRAM, integrated Ethernet controller, USB 2.0 (OTG, Host, Device), 83 General purpose I/O pins, 12x16-bit and 2x32-bit timers, 3x12-bit A/D (24 channels), 2x12-bit D/A , 4xUSARTs, 2xUARTs, internal Real time clock (RTC), 2xI2C, 3xSPI and 2xCAN controllers.

25MHz crystal oscillator. We carefully chose the most convenient crystal value that provides clock frequency which can be used directly, or with the PLL multipliers to create higher MCU clock value. MCU card also contains 32.768 kHz crystal oscillator which provides external clock for RTCC module.

USB communications lines. These two jumpers, when in USB position, connect D+ and D- lines of the on-board USB connector with PA11 and PA12 microcontroller pins. Since STM32F207VGT6 supports USB, jumpers are in USB position.

Ethernet transceiver. MCU card contains single-chip Ethernet physical (PHY) layer transceiver which provides additional Ethernet functionality to STM32F207VGT6 controller

Downloads

Architecture ARM (32-bit)
MCU STM32F207VGT6
MCU speed 120 MHz
MCU Memory 1 MB of Flash, 128 KB of RAM
Power Supply 3.3V
Compatibility EasyMx PRO v7 for STM32

You Might Also Need

Products in the same category

Send a message

EasyMx PRO v7 for STM32 MCUcard with STM32F207VGT6

EasyMx PRO v7 for STM32 MCUcard with STM32F207VGT6

What can we do for you?