15% OFF on everything in the shop - the offer lasts until June 27, 12:00 CET. Discount applies at checkout
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping  To be determined
Total
Continue shopping Proceed to checkout

XDP OTP Production Burner for SMPS

MIKROE-2362

590 g

XDP™ OTP Production Burner for SMPS is a specialized tool for programming Infineon's XDP™ Switching Mode Power Supply ICs (SMPS) from DP2A and DP2B families. The device is designed for two types of users: experts (engineers who conduct the initial configuration) and operators (production line employees who carry out the programming).

More details

$990.00

XDP™ OTP Production Burner for SMPS is a specialized tool for programming Infineon's XDP™ Switching Mode Power Supply ICs (SMPS) from DP2A and DP2B families. The device is designed for two types of users: experts (engineers who conduct the initial configuration) and operators (production line employees who carry out the programming). The programming process varies depending on the type of target device. For DP2B-based ICs it consists of three distinct operations that can be performed on target devices:

  • 1. Firmware programming
  • 2. Patching
  • 3. Partial or full set parameter configuration

For DP2A-based devices, it is only possible to update a full set of parameters.

Having four separate channels, the XDP™ OTP Burner can be used to program up to four SMPS ICs at once (enabling a single production line employee to program a large volume of target devices efficiently).

Supported devices

How it works

The XDP™ OTP Burner programs target devices from configuration files stored in its internal Flash memory, or external storage (MicroSD card). These configuration files (that can contain a firmware update, patch or parameter set) are prepared with a dedicated PC application.

XDP OTP programmer

Once the configuration files have been prepared, the XDP™ OTP Burner can be used as a standalone device.

About XDP™

Infineon's line of XDP™ Switching Mode Power Supply ICs represent the first all-in-one package solution that integrate a digital power controller with key peripherals. They enable higher energy efficiency, shorter development cycles, lower cost, and more flexibility. For more information, see the page about XDP™ on Infineon's website.

Key features

  • Four IDC8 connectors for target devices
  • USB port for connecting to PC
  • 9V DC power jack
  • User interface for standalone use: 7x signal LEDs and 2x Pushbuttons
  • External storage with Micro SD card slot
  • Dedicated PC application for preparing configuration files
  • Upgradable firmware (USB-HID bootloader inside)

Customer support

MikroElektronika provides up to two hours (per purchased device) of free technical support for the XDP™ OTP Burner via Skype. This support relates chiefly to questions on how to integrate the device into a production line.

Package contains

  • XDP™ OTP Production Burner for SMPS
  • Power Supply Unit w/ AC plug W2E (Europe)
  • USB Cable (Type A - Type B plugs)
  • MicroSD card 4GB
  • Quick start guide flyer

Note: IDC8 cables and mechanical setup for connecting to target devices are NOT supplied in the packaging.

Technical specifications

  • USB Supply (safe side): 5V max. 400mA
  • DC Jack Supply (safe side): 9V max. 800mA
  • Safe and galvanic isolation from XDP OTP Burner board to low voltage side (USB and 9V DC Power Jack)
  • Isolation Voltage 5000Vrms for 1 Min
  • Maximum voltage swing output (unsafe side) - Target 5 – 26V
  • Operating voltage (unsafe side) - Target 7.5V(typ.)
  • Tolerance for Vout @7.5V ± 50mV
  • Maximum ambiance temperature 40ºC
  • CE certified

Note: IDC8 cables and mechanical setup for connecting to target devices are NOT supplied in the packaging.

Downloads

Applications Specialized tool for programming Infineon's XDP™ Switching Mode Power Supply ICs (SMPS)
Key Features Four IDC8 connectors for target devices, USB port for connecting to PC
Key Benefits External storage with Micro SD card slot, Upgradable firmware (USB-HID bootloader inside)
Interface USB
Power Supply 5V (via USB) or 9V DC (via adapter)

You Might Also Need

Products in the same category

Send a message

XDP OTP Production Burner for SMPS

XDP OTP Production Burner for SMPS

What can we do for you?